1. Mainly slurry pump spare parts
Naipu Slurry pump and standard spare parts with high anti-abrosive can be supply with huge amount within a short period.
Impeller, Casing, shaft, throat bush, wear plate, case, cover, stuffing box, lantern restrictor, cover plate bolt, volute, throat bush, shaft sleeve, cover plate liner, frame plate liner...
2. Slurry pump spare parts feature
The impeller is the main rotating component which normally has vanes to impart the centrifugal force to the liquid.
Most slurry pump casing are "slower" than their water pump cousins, primarily to reduce wear though lower internal velocities.
Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp edged particles, or on duties having high impeller peripheral velocities or high operating temperatures.
Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
3. What material does the spares including?
Sand slurry pump Impeller part code: DG4137, EG6137, FG8137, FG10137, GG12137, GGH10137, HG14137...
1) Material: A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61, Cr24, Cr26, Cr27, Cr30, Cr28, Cr36, W1, W2, NA, Cr15Mo3, R08, R24, R26, R33, R38, R55, R66, S01, S10, S12, S21, S31, S42, S44, S50, U01, EPDM, PU, CR...
2) Shaft material: 45#, 40Cr, SS304, SS315...
3) Shaft sleeve material: 3Cr13, 4Cr13, SS304, SS316...
4) Lantern ring material: 304, 316, PTFE, Cu...
5) Bearing housing/ bearing end cover material: G01, D21...
6) Wet end part material: A05, A07, A49, A51, A33, A61, R08, R26, R33, R38, R55, S01, S12, S21, S42, S50, U01, EPDM, PU, CR...
7) Vanes from 3-6. It depending on the size of the particles in the slurry.
8) Impeller type including Close, Semi-open and Open type. Impellers are generally closed because of higher efficiencies and are less prone to wear in the front liner region. Open impellers are more common in smaller pumps or where particle blockage may be a problem or where the shear provided by an open impeller is an aid to pumping froth.
10) We can also produce the non-standard impellers for some special situations.
Pumping coarse coal
Pumping fibrous material
Reduced diameter impellers
Reduced eye impellers.
4. Contact information
Katherine Hou
Shijiazhuang Naipu Pump Co., Ltd
Tel: +86-311-83802338 Cellphone: +86-15028111051
Fax: +86-311-87162902 Skype: katherine_naipump
没有评论:
发表评论