TL(R) Horizontal Cantilever Desulphurization pump

Desulphurization slurry pump features

1. The pump restricting parts adopt the advanced flow simulation technology to guarantee the reliable pump design and the high operating efficiency.

2. The anti-corrosion & anti-wear metal and rubber materials which are specifically developed for FGD pumps have been proved by the practice that they can ensure the long-life pump operation.

3. Through adjusting the bearing components to change the impeller position in the pump chamber all-time high-efficient operation of the pump can be achieved.

4. The pump is characterized by the back knock-down structure which is simple and advanced. It is easy to maintain and repair and it is on need dismantling inlet and outlet water pipes.

5. The containerized mechanical seal specially used for the desulphurization process is adopted and its operation is reliable.

6. The Pump casing, Cover late and Connection plate material is Nodular cast iron.

     Rubber liner pump: The Impeller and Inhale plate with A49 duplex stainless white iron material. The Cover plate liner, Frame plate liner and Rear liner material is Natural rubber.

   

     Metal liner pump: The Impeller, Volute liner, Front liner and Rear liner material is A49 duplex stainless white iron. The Inhale plate with Ductile iron rubberizing.

Model Nomenclature

600X-TL(R)

600--Outlet diameter of dredging pump (mm)

X-- Frame type(X-oil lubrication)

TL--Desulphurization pump FGD

R--Rubber liners

Performance Data

TL(R) Desulphurization Pump 

Size Range: 350-900mm
Flow Range: 1600-14000m3/h
Head Range: 23-40m

Type	Capacity (m3/h)	Head (m)	Speed (r/min)	Maximum efficiency η(%)	NPSH (m)	Outlet diameter (mm)	Inlet diameter (mm)
350X-TL(R)	1600	25	960	82	4.5	350	400
400X-TL(R)	2500	25	725	83	5.0	400	450
500X-TL(R)	3750	25	725	85	5.0	500	500
600X-TL(R)	6300	25.5	620	88	5.5	600	700
700X-TL(R)	6840	26	485	87	6.0	700	800
800X-TL(R)	9360	31	485	90	7.0	800	900
900X-TL(R)	15000	30	485	90	8.5	900	1000
1000X-TL	10440	15	485	89	7.0	1000	1200

TL(R) Pump construction sketch

TL(R) Main part number at the drawing

1. Frame 2. Disassembly ring 3. Shaft cover 4. Mechanical seal 5. Rear liner 6. Front liner

7. Inhale plate 8. Impeller 9. Cover plate 10. Frame plate liner 11. Pump Casing 12. Connection plate

Relevant pumps

We can produce many kinds of centrifugal slurry pump for mining, sand and other solids slurry transporting.

Such as following type:

 1. AH(R) series Metal/ Rubber Lined Horizontal Slurry Pump

 2. M(R) series Medium Duty Slurry Pump

 3. L(R) series Low Abrasive Slurry Pump

 4. HH series High Head Slurry Pump

 5. SH series High Head Slurry Pump

 6. G series Sand and Gravel Pump

 7. WS(G) series Sand Dredging Pump

 8. ZJW/ ZJW series Filter Press Feed Pump

 9. SP(R) series Vertical Slurry Pump

10. AF(R) series Vertical Froth Pump

11. ZJQ series Submersible Sand Slurry Pump

12. WQ series Submersible Sewage Pump

13. TL(R) series Desulphurization Slurry Pump

14. ZGB series Heavy Slurry Pump

15. OEM series Slurry Pump 

16. All Pump Spare Parts

My service card