TL(R) Horizontal Cantilever Desulphurization pump

Desulphurization slurry pump features

1. The pump restricting parts adopt the advanced flow simulation technology to guarantee the reliable pump design and the high operating efficiency.

2. The anti-corrosion & anti-wear metal and rubber materials which are specifically developed for FGD pumps have been proved by the practice that they can ensure the long-life pump operation.

3. Through adjusting the bearing components to change the impeller position in the pump chamber all-time high-efficient operation of the pump can be achieved.

4. The pump is characterized by the back knock-down structure which is simple and advanced. It is easy to maintain and repair and it is on need dismantling inlet and outlet water pipes.

5. The containerized mechanical seal specially used for the desulphurization process is adopted and its operation is reliable.

6. The Pump casing, Cover late and Connection plate material is Nodular cast iron.

     Rubber liner pump: The Impeller and Inhale plate with A49 duplex stainless white iron material. The Cover plate liner, Frame plate liner and Rear liner material is Natural rubber.

   

     Metal liner pump: The Impeller, Volute liner, Front liner and Rear liner material is A49 duplex stainless white iron. The Inhale plate with Ductile iron rubberizing.

Model Nomenclature

600X-TL(R)

600--Outlet diameter of dredging pump (mm)

X-- Frame type(X-oil lubrication)

TL--Desulphurization pump FGD

R--Rubber liners

Performance Data

TL(R) Desulphurization Pump 

Size Range: 350-900mm
Flow Range: 1600-14000m3/h
Head Range: 23-40m

Type	Capacity (m3/h)	Head (m)	Speed (r/min)	Maximum efficiency η(%)	NPSH (m)	Outlet diameter (mm)	Inlet diameter (mm)
350X-TL(R)	1600	25	960	82	4.5	350	400
400X-TL(R)	2500	25	725	83	5.0	400	450
500X-TL(R)	3750	25	725	85	5.0	500	500
600X-TL(R)	6300	25.5	620	88	5.5	600	700
700X-TL(R)	6840	26	485	87	6.0	700	800
800X-TL(R)	9360	31	485	90	7.0	800	900
900X-TL(R)	15000	30	485	90	8.5	900	1000
1000X-TL	10440	15	485	89	7.0	1000	1200

TL(R) Pump construction sketch

TL(R) Main part number at the drawing

1. Frame 2. Disassembly ring 3. Shaft cover 4. Mechanical seal 5. Rear liner 6. Front liner

7. Inhale plate 8. Impeller 9. Cover plate 10. Frame plate liner 11. Pump Casing 12. Connection plate

Relevant pumps

We can produce many kinds of centrifugal slurry pump for mining, sand and other solids slurry transporting.

Such as following type:

 1. AH(R) series Metal/ Rubber Lined Horizontal Slurry Pump

 2. M(R) series Medium Duty Slurry Pump

 3. L(R) series Low Abrasive Slurry Pump

 4. HH series High Head Slurry Pump

 5. SH series High Head Slurry Pump

 6. G series Sand and Gravel Pump

 7. WS(G) series Sand Dredging Pump

 8. ZJW/ ZJW series Filter Press Feed Pump

 9. SP(R) series Vertical Slurry Pump

10. AF(R) series Vertical Froth Pump

11. ZJQ series Submersible Sand Slurry Pump

12. WQ series Submersible Sewage Pump

13. TL(R) series Desulphurization Slurry Pump

14. ZGB series Heavy Slurry Pump

15. OEM series Slurry Pump 

16. All Pump Spare Parts

My service card

Hastelloy C alloy centrifugal mining slurry pumps

1. What is a slurry pump? 

       

The centrifugal slurry pump utilises the centrifugal force generated by a rotating impeller to impart energy to the slurry in the same manner as clear liquid type centrifugal pumps.

Slurry pumps need much wider and heavier impellers to accommodate the passage of large particles. They also be constructed in special materials to withstand the internal wear caused by the solids.

2. What advantage of AH slurry pump?

AH pumps are those of cantilever, horizontal and centrifugal ones, whose shafts can be sealed by packing seals or by centrifugal type seals.

The positions of the pump outlet can be positioned at an interval of 45°according to different requirements, so eight different angles can be applied by rotation in installation.

AH slurry pumps with good impeller size and design, its ease of maintenance, the type of shaft seal to be used and the choice of the optimum materials withstand wear caused by the abrasive, erosive and often corrosive attack on the materials. They can also be applied Multi-staged in series.

3. What mainly usage of AH slurry pump 

Slurry pumps are widely used to transport corrosive/ abrasive and high concentration slurry in many industries. such as Gold, Silver, Iron ore, Tin, Steel, Coal, Titanium, Copper, Mineral sands, Lead and Zinc. Various other industries include Molybdenum, Electric Utilities, Oil Shale, Water & Sewage Utilities, Building areas, Sand & Gravel, Tobacco and Agriculture (hog, poultry, dairy manure).

Mining & Minerals, Grinding and screening, Hydrocyclone separation, Magnetic separation, Flotation, Thickening, Filtration, Leaching, solvent extraction and electrowinning, Pelletising, Tailings, Metallurgy, Roasting, Annealing and pickling, Coke quenching, Hot strip milling, Neutralisation, Mud handling and waste treatment.

4. Slurry pump performance

Type	Allowable  Mating Max. Power (Kw)	Clear Water Performance					Impeller
		Capacity/ Q m³/hr	Head/m	Speed/rpm	Max  Efficiency /%	NPSH/m	Nos  of Vane	Diameter /mm
1.2/1 B-AH	15	12.6-28.8	6-68	1200-3800	40	2-4	5	152
2/1.5 B-AH	15	32.4-72	6-58	1200-3200	45	3.5-8	5	184
3/2 C-AH	30	39.6-86.4	12-64	1300-2700	55	4-6	5	214
4/3 C-AH	30	86.4-198	9-52	1000-2200	71	4-6	5	245
6/4 D-AH	60	162-360	12-56	800-1550	65	5-8	5	365
8/6 E-AH	300	360-828	10-61	500-1140	72	2-9	5	510
10/8 F-AH	560	612-1368	11-61	400-850	71	4-10	5	686
12/10 ST-AH	560	936-1980	7-68	300-800	82	6	5	762
14/12 ST-AH	560	1260-2772	13-63	300-600	77	3-10	5	965
16/14 TU-AH	1200	1368-3060	11-63	250-550	79	4-10	5	1067
20/18 TU-AH	1200	2520-5400	13-57	200-400	85	5-10	5	1370
1.5/1 B-AHR	15	10.8-25.2	7-52	1400-3400	35	2-4	3	152
2/1.5 B-AHR	15	25.2-54	5.5-41	1000-2600	50	2.5-5	5	178
3/2 C-AHR	30	36-75.6	13-39	1300-2100	55	2-4	5	213
4/3 C-AHR	30	79.2-180	5-34.5	800-1800	59	3-5	5	245
6/4 D-AHR	60	144-324	12-45	800-1350	65	3-5	5	365
8/6 E-AHR	300	324-720	7-49	400-1000	65	5-10	5	510
10/8 F-AHR	560	540-1188	12-50	400-750	75	4-12	5	686
12/10 ST-AHR	560	720-1620	7-45	300-650	80	2.5-7.5	5	762
16/14 TU-AHR	1200	1200-3000	11-42	250-450	82	4-9	5	1067
20/18 TU-AHR	1200	1800-4000	12-44	200-350	82	5-10	5	1370

5. Slurry pump construction drawing

6.  Main part number at the drawing

032: Frame Plate 060: Intake Joint 132: Discharge Joint 083: Throatbush 110: Volute Liner 147: Impeller

122: Stuffing Box Seal 036: Frame Plate Liner 013: Cover Plate 018: Cover Plate Liner 124: Volute Liner Seal 041: Frame Plate Liner Insert

7. Materials of construction

	LINERS	IMPELLERS	CASING	BASE	EXPELLER	EXPELLER RING	SHAFT SLEEVE	SEALS
Standard	Chrome Alloy Natural Rubber	Chrome Alloy Natural Rubber	SG Iron	SG Iron	Chrome Alloy or SG Iron	Chrome Alloy or SG Iron	SG Iron	Rubber and Nitrile
Options	Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Viton Nitrile EPDM Hypalon	Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Nitrile Hypalon	SG Iron Various grades	MS Fabricated Cast Iron	NI Resist Ferralium Hastelloy C Polyurethane 316 SS W151	NI Resist Ferralium Hastelloy C 316 SS Rubber W151 Polyurethane Neoprene Butyl Nitrile	EN56C Ferralium Hastelloy C Titanium 316 SS 304 SS	Ceramic Stellite Chrome Oxide Nordel Neoprene Viton

8. Relevant slurry pump 

We can produce many kinds of centrifugal slurry pump for mining ,sand and other solids slurry transporting.

 

9. Slurry pump production flow  

Mold making → Molds → Casing → Heat treating → Machining → Assembling → Finished pump → Static balance → Packaging

 

 10. Factory service 

OEM service	Produce the pump and spare parts according to client's drawing or sample.
Pump slection	Help customers select the type, size and operating speed of pumps that will perform at the lowest cost.
Using service	Offer Design, Installation, Repair and Maintenance solutions and Mine measuring up service.
Quality control	Pay more attention to the quality in every process with different instruments.
Material service	Interchangeable metal design allow best material choice for any application.
After-sales service	Provide lifetime after sale service to solve any question during uses and large stock for standard spare parts.
Guarantee	One year guarantee for whole machine except of the wet end parts.

 

 11. Company information 

Shijiazhuang Naipu Pump Co., Ltd is a professional manufacturing enterprise of slurry pumps. We have about 30 years experiences and export to worldwide countries. Our technical team consists of talents specialized in hydraulic machinery, casting, heat treatment, engineering, material science and machining. We proudly manufacture quality pumps whose parts are 100% reverse interchangeable with major brands. This means no more inventory hassles when you decide to use another pump supplier.

12. Quality control

Stages of manufacture	Quality cotrol activities	Specification
Raw material arrival	Sampling, material chemical analysis	NPB121.1-29-1997
Casting and composition	Material material chemical analysis of pump parts	NPB121.1-29-1997
	Casting quality inspection	NPB302-1998
Key component machining	Dimension precision inspection	NPB2105-87
	Impeller balancing	NPB061-2000
General assembly	Procedure operaion	NPB2103-96
	Hydraulic static test	NPB064-1998
Performance test of pump unit	Capacity and head	NPB157-1997
	Vibration and noise	JB/T8097-95
	Bearing temperature	JB/T5295-91
Final inspection	Packaging of pump unit	NPB0157-1997
	Documents	NPB0157-1997
	Spare parts and accessories	NPB0157-1997

1. Our pumps quality has reached domestic and internaional advanced level in this field.

2. We are responsible for our products quality, if there are some quality problems after you received, we will be prmptly returned or replacement the kits. 

13. CE, SGS, ISO9001 Certification

 

14. FAQ 

Faults	Reason	Removal
Pump fails to discharge any liquid.	Incorrect direction of pump rotation and impeller worn. Suction pipe blocked	Check direction of rotation and replace a new impeller
Power consumption on shaft is excessive	Rotating component is rubbing on a stationary part. Bearing worn. Drive belt tension too tight Flow rate too large Pump speed and ratio too high. Misalignment or unparallel of drive shaft and pump shaft.	Removal the rub Replace the bearing Adjust belt Modify the pump duty and speed. Adjust drive and pump shaft
Bearing is over hearing	Lubricants too much or less. Containing impurities in the lubricant Bearing worn.	Lubricating as requirements. Replace clean lubricant. Replace new bearing.
Bearing has short life.	Misalignment or unparallel of drive and pump motor. Shaft bent. Impeller unbalanced due to wear Foreign object entered into the bearing or insufficient lubrication Incorrect procedure followed in fitting bearings.	Adjusting drive and pump shaft. Replacing shaft. Remove rubbing and replace new impeller Clean the bearing. Replace or refit the bearings.
Pump vibrates or is noisy.	Bearings worn. Impeller unbalanced. Air entered into suction pipe or blocked. Flow rate is noneuniform and pump not primed.	Replaced by new bearings. Replaced by new impeller. Discharge air and remove block. Improve on the pump feeding.