Warman AF(R) vertical froth pump

1. What is a froth pump? 

The AF froth pumps has been designed to increase the pumpability of frothy slurry. The pump operation is similar to hydrocyclone seperation. 

The basic principle of the froth pump operation is to de-aerate or partially de-aerate the froth before it enters the pumping. Its handling capacity of the pump is muchhigher than that of other types of slurry pump without shaft seal and sealing water. 

2. What advantage of AF slurry pump?

The advantages of the pump are of excellent performance, easy assebly & disassembly, high and etc.

The AF series froth pumps is a efficiency pump are suitable for handing solids-liquid mixture, special for delivering frothy pulp generated in flotation machines in metalliferous and coal flotation circuits.

The AF froth pump is ideal for all applications involving handling of air entrained slurries, such as flotation froth in base metal concentrators, phosphate and apatite washing plants and calcium carbonate upgrading plants.

The pump can also be used as a mixing and distribution unit, where dry powder has to be mixed (and wetted) with water. It can also be used with cement in ready mixed concrete and for grouting and injection mixing.

3. What structure of the AF froth pump

The construction of pump head is double casings slurry pump. All wet-parts can be supplied in Ni-hard, high chrome alloy iron and pressure-moulded natural or synthetic rubber.

The driver end can be exchanged with that of type--SP(R) pumps. The hopper-tank is fabricated with steel plate. Its inner wall of the tank can be covered with liner according to different medium pumped.

The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. 

4. Froth pump construction drawing

5.  Main part number at the drawing

1.Bearing 2.Bearing Assembly 3.Tank

4.Frame Plate 5.Cover Plate

6. Materials of construction

	LINERS	IMPELLERS	CASING	BASE	EXPELLER	EXPELLER RING	SHAFT SLEEVE	SEALS
Standard	Chrome Alloy Natural Rubber	Chrome Alloy Natural Rubber	SG Iron	SG Iron	Chrome Alloy or SG Iron	Chrome Alloy or SG Iron	SG Iron	Rubber and Nitrile
Options	Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Viton Nitrile EPDM Hypalon	Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Nitrile Hypalon	SG Iron Various grades	MS Fabricated Cast Iron	NI Resist Ferralium Hastelloy C Polyurethane 316 SS W151	NI Resist Ferralium Hastelloy C 316 SS Rubber W151 Polyurethane Neoprene Butyl Nitrile	EN56C Ferralium Hastelloy C Titanium 316 SS 304 SS	Ceramic Stellite Chrome Oxide Nordel Neoprene Viton

7. AF froth pump selection chart

( Note: Approximate performance for clear water,to be used for primary selection only.)

8. Pump performance parameters

Type	Allowable Mating Max. Power(Kw)	Clear Water Performance				Impeller
		Capacity/Q   m³/hr	Head/m	Speed/rpm	Max Efficiency/%	Impeller Diameter/mm
2 QV-AF	15	7.2-33	5-30	800-1800	45%	229
3 QV-AF	20	10-104	10-28	700-1500	55%	268
4 RV-AF	40	15-130	6-28	500-1050	55%	397
6 SV-AF	75	55-330	6-25	350-680	55%	560

10. Contact information

Shijiazhuang Naipu Pump Co., Ltd     

Tel: +86-311-83802338 Cellphone: +86-15028111051 

Fax: +86-311-87162902 Skype: katherine_naipump

URL: www.naipump.com Email: katherine@naipump.com 

ZJQ submersible sand dredging pump

1. Submersible slurry pump

ZJQ submersible centrifugal slurry pumps are mainly used to pump high-hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, such as finished ores, 

refuse ores, ashes, cinders, cements, mud, mineral stones and etc.

2. Application Condition

1— Power: 50/60HZ, 380V/460V/660V, 3-Phase.
2— Medium Temperature: Max. 40°C and without explosion gas.
3— Slurry Concentration By weight up to 60%.
4— Max submersible depth: <20m
Min submersible depth: >1m
5— Type of installation: Vertical (recommend) or as
customer’s requirement
6— Continuous operation

3. Application and Feature 

ZJQ submersible Slurry motor pump is a kind of hydraulic mechanism which motor connects directly with pump. It is used for delivering liquid contained sand, coal cinder solid etc.. The pump can be mainly employed in clearing the mud in lake, river, sea and widening channel etc. it also can be applied to clear out sewage pool; in building site, steel works and power station etc. the pump adopts excellent material, advanced structure, and it is with wide flowing passage & strong delivery ability. The hydraulic parts are wear-resistant. The pump is yet completed with control unit. The pump set consists of main impeller and vice impeller two parts. The main impeller is used for absorbing and delivering solid-liquid mixture, the vice impeller is used for spraying or stirring solid-liquid mixture to help the impeller delivering.

4. Advantage

1— Submersible work Without influence of suction head.
2— No assistant vacuum pump, save your invest
3— No noise, keep the silence of your work station
4— With agitator, no need extra stirring devices , more convenience
for operating.
5— It need not to build pump house.
6— Directly works on the surface of the slurry, with more efficiency
to deliver slurry.

5. Submersible pump construction drawing

6. Main part number at the drawing

1. Power cable 2. Cable cover 3. Cable seat 4. Motor cover 5. Thermal sensor 6. Stator 7. Rotor 8. Lower bearing 9. Float switch 10. Oil chamber 11. Mechanical seal

12. Oil sealing 13. Spacer sleeve 14. Casing cover 15. Casing 16. Impeller 17. Wear ring 18. Strainer 19. Agitator 20. Impeller cap 21. Base plate 22. Control cable

7. Materials of construction

	IMPELLERS	CASING	AGITATOR	SHAFT	WEAR RING	EXPELLER	CASING COVER	SPACER SLEEVE	OIL CHANBER	OHTER PARTS
Standard	KMTB Cr26	Cast Iron	KMTB Cr26	St. St. 316	KMTB Cr26	KMTB Cr26	KMTB Cr26	St. St. 316	Cast Iron	Cast Iron

8. Submersible slurry pump selection chart

9. Specification

• Size range (discharge)   1" to 20"   25 mm to 500 mm
• Capacities to 22,000 gpm  to 5,000 m3/hr
• Heads   to 426 ft    to 130 m

• Pressures   to 300 psi   to 2,020 kPa

10. Type Notation

ZJQ50-26-11

50   Capacity(m3/h)

26   Head(m)

11   Power(kw)

J     With Agitator

L     With cooling jacket

11. Pump performance parameters

Type	Capacity(m3/h)	Head(m)	Motor power(kw)	Speed(rpm)	Max. solids dia.(mm)
ZJQ30-30-7.5	30	30	7.5	2850	7
ZJQ70-20-11	70	20	11	980	24
ZJQ150-15-15	150	15	15	980	32
ZJQ200-15-22	200	15	22	950	44
ZJQ720-36-160	720	36	160	730	56
ZJQ300-20-37	300	20	37	980	69
ZJQ1000-32-200	1000	32	200	730	72
ZJQ1450-31-250	450	31	250	730	92

12. Contact information

Shijiazhuang Naipu Pump Co., Ltd     

Tel: +86-311-83802338 Cellphone: +86-15028111051 

Fax: +86-311-87162902 Skype: katherine_naipump

URL: www.naipump.com Email: katherine@naipump.com